Railgun

Not to be confused with coilgun.

A railgun is an entirely electrical gun that accelerates a conductive projectile along a pair of metal rails using the same principles as the homopolar motor. Railguns use two sliding or rolling contacts[1] that permit a large electric current to pass through the projectile. This current interacts with the strong magnetic fields generated by the rails and this accelerates the projectile. Particular characteristics are the lack of propellant (only the projectile and the electrical energy to launch it are required to be expended) and the ability to launch projectiles much faster than firearms-based technology allows.

Railguns have long existed as experimental and demonstrator technology. However, in recent years, some are moving towards becoming feasible military technology. For example, in the late 2000s, the U.S. Navy tested a railgun that accelerates a 3.2 kg (7 pound) projectile to approximately 2.4 kilometres per second (5,400 mph).[2] They gave the project the Latin motto "Velocitas Eradico", which they translate as "Speed Destroys" but can more accurately be translated "I am speed and I destroy," or similar.

Apart from military applications, railguns have also been proposed to launch spacecraft into orbit. Unless the launching track was particularly long (and the acceleration required to reach orbit spread over a much longer time), such launches would however be restricted to unmanned spacecraft.

Contents

History

In 1918, French inventor Louis Octave Fauchon-Villeplee invented an electric cannon which has a strong resemblance to the linear motor. He filed for a US patent on 1 April 1919, which was issued in July 1922 as patent no. 1,421,435 "Electric Apparatus for Propelling Projectiles".[3] In his device, two parallel busbars are connected by the wings of a projectile, and the whole apparatus surrounded by a magnetic field. By passing current through busbars and projectile, a force is induced which propels the projectile along the bus-bars and into flight.[4]

During World War II the idea was revived by Joachim Hänsler of Germany's Ordnance Office, and an electric anti-aircraft gun was proposed. By late 1944 enough theory had been worked out to allow the Luftwaffe's Flak Command to issue a specification, which demanded a muzzle velocity of 2,000 m/s (6,600 ft/s) and a projectile containing 0.5 kg (1.1 lb) of explosive. The guns were to be mounted in batteries of six firing twelve rounds per minute, and it was to fit existing 12.8 cm FlaK 40 mounts. It was never built. When details were discovered after the war it aroused much interest and a more detailed study was done, culminating with a 1947 report which concluded that it was theoretically feasible, but that each gun would need enough power to illuminate half of Chicago.[4]

During 1950, Sir Mark Oliphant, an Australian physicist and first director of the Research School of Physical Sciences at the new Australian National University, initiated the design and construction of the world's largest (500 megajoule) homopolar generator. This machine was used to power the large-scale railgun which was used as a scientific instrument.

Railgun design

Theory

A railgun consists of two parallel metal rails (hence the name) connected to an electrical power supply. When a conductive projectile is inserted between the rails (at the end connected to the power supply), it completes the circuit. Electrons flow from the negative terminal of the power supply up the negative rail, across the projectile, and down the positive rail, back to the power supply.[5]

This current makes the railgun behave as an electromagnet, creating a powerful magnetic field in the region of the rails up to the position of the projectile. In accordance with the right-hand rule, the magnetic field circulates around each conductor. Since the current is in the opposite direction along each rail, the net magnetic field between the rails (B) is directed vertically. In combination with the current (I) across the projectile, this produces a Lorentz force which accelerates the projectile along the rails. There are also forces acting on the rails attempting to push them apart, but since the rails are mounted firmly, they cannot move. The projectile slides up the rails away from the power supply.

A very large power supply, providing on the order of one million amperes of current, will create a tremendous force on the projectile, accelerating it to a speed of many kilometres per second (km/s). 20 km/s has been achieved with small projectiles explosively injected into the railgun. Although these speeds are possible theoretically, the heat generated from the propulsion of the object is enough to erode the rails rapidly. Such a railgun would require frequent replacement of the rails, or to use a heat resistant material that would be conductive enough to produce the same effect.

Considerations

The power supply must be able to deliver large currents, sustained and controlled over a useful amount of time. The most important gauge of power supply effectiveness is the energy it can deliver. As of December 2010, the greatest known energy used to propel a projectile from a railgun was 33 megajoules.[6] The most common forms of power supplies used in railguns are capacitors and compulsators which are slowly charged from other continuous energy sources.

The rails need to withstand enormous repulsive forces during shooting, and these forces will tend to push them apart and away from the projectile. As rail/projectile clearances increase, arcing develops, which causes rapid vaporization and extensive damage to the rail surfaces and the insulator surfaces. This limited some early research railguns to one shot per service interval.

The inductance and resistance of the rails and power supply limit the efficiency of a railgun design. Currently different rail shapes and railgun configurations are being tested, most notably by the United States Navy, The Institute for Advanced Technology, and BAE Systems.

Materials used

The rails and projectiles must be built from strong conductive materials; the rails need to survive the violence of an accelerating projectile, and heating due to the large currents and friction involved. The recoil force exerted on the rails is equal and opposite to the force propelling the projectile. The seat of the recoil force is still debated. The traditional equations predict that the recoil force acts on the breech of the railgun. Another school of thought invokes Ampère's force law and asserts that it acts along the length of the rails (which is their strongest axis).[7] The rails also repel themselves via a sideways force caused by the rails being pushed by the magnetic field, just as the projectile is. The rails need to survive this without bending, and must be very securely mounted.

Heat dissipation

Massive amounts of heat are created by the electricity flowing through the rails, as well as by the friction of the projectile leaving the device. The heat created by this friction itself can cause thermal expansion of the rails and projectile, further increasing the frictional heat. This causes three main problems: melting of equipment, decreased safety of personnel, and detection by enemy forces. As briefly discussed above, the stresses involved in firing this sort of device require an extremely heat-resistant material. Otherwise the rails, barrel, and all equipment attached would melt or be irreparably damaged.

In practice the rails are, with most designs of railgun, subject to erosion due to each launch; and projectiles can be subject to some degree of ablation also, and this can limit railgun life, in some cases severely.[8]

Mathematical formula

In railgun physics, the magnitude of the force vector can be determined from a form of the Biot–Savart law and a result of the Lorentz force. It can be derived mathematically in terms of the permeability constant (\mu_0), the radius of the rails (which are assumed to be circular in cross section) (r), the distance between the centerpoints of the rails (d) and the current in amps through the system (I) as follows:

It can be shown from the Biot-Savart law that the magnetic field at a given distance (s) from a semi-infinite current-carrying wire is given by:

\mathbf{B}(s) = \frac{1}{2}\frac{\mu_0 I}{ 2\pi s}\hat{\phi}

So, in the space between two semi-infinite wires separated by a distance, d, the magnitude of the field is:

B(s) = \frac{\mu_0 I}{ 4\pi}\left(\frac{1}{s}%2B\frac{1}{d-s}\right)

To obtain the average magnetic field in the space between the two wires, we assume that r is small compared with d and compute the following integral:

B_{\text{avg}} = \frac{1}{d}\int_r^{d-r}B(s)\text{d}s = \frac{\mu_0 I}{ 4\pi d}\int_r^{d-r}\left(\frac{1}{s}%2B\frac{1}{d-s}\right)\text{d}s=\frac{\mu_0 I}{ 2\pi d} \ln \frac{d-r}{r} \approx \frac{\mu_0 I}{ 2\pi d} \ln \frac{d}{r}

By the Lorentz force law, the magnetic force on a current-carrying wire is given by IdB, so since the width of the conductive projectile is d, we have

F = IdB_{\text{avg}} = \frac{\mu_0 I^2}{ 2\pi}\ln \frac{d}{r}

The formula is based on the assumption that the distance (l) between the point where the force (F) is measured and the beginning of the rails is greater than the separation of the rails (d) by a factor of about 3 or 4 (l>3d). Some other simplifying assumptions have also been made; to describe the force more accurately, the geometry of the rails and the projectile must be considered.

Applications

Railguns have a number of potential practical applications, primarily for the military. However, there are other theoretical applications currently being researched.

Launch / launch assist of spacecraft

Electrodynamic assistance to launch rockets has been studied.[9] Space applications of this technology involve specially formed electromagnetic coils and superconducting magnets.[10] Composite materials are used for this application.[11] There are similarities with mass driver technologies and proposals.

Key Parameters[12] Value Units
Muzzle Velocity 7500 m/s
Muzzle Energy 35 GJ
Launcher length 1600 m
Maximum acceleration 19500 m/s^2
Maximum acceleration 1988 g's
Launch time 0.43 s
Current density 6.8 MA/m

In 2003, Ian McNab outlined a plan to turn this idea into a realized technology.[12] The accelerations involved are significantly stronger than human beings can handle. This system would only be used to launch sturdy materials, such as food, water, and fuel. Note that escape velocity under ideal circumstances (equator, mountain, heading east) is 10.735 km/s. The system would cost $528/kg, compared with $20,000/kg [12] on the space shuttle (see Non-rocket spacelaunch). The railgun system McNab suggested would launch 500 tons per year, spread over approximately 2000 launches per year. Because the launch track would be 1.6 km, power will be supplied by a distributed network of 100 rotating machines (compulsator) spread along the track. Each machine would have a 3.3 ton carbon fiber rotor spinning at high speeds. A machine can recharge in a matter of hours using 10 MW. This machine could be supplied by a dedicated generator. The total launch package would weigh almost 1.4 tons. Payload per launch in these conditions is over 400 kg.[12] There would be a peak operating magnetic field of 5T -- Half of this coming from the rails, and the other half from augmenting magnets. This halves the required current through the rails, which reduces the power fourfold.

As weapons

Railguns are being researched as weapons with projectiles that do not contain explosives, but are given extremely high velocities: 3,500 m/s (11,500 ft/s, approximately Mach 10 at sea level) or more (for comparison, the M16 rifle has a muzzle speed of 930 m/s, or 3,050 ft/s), which would make their kinetic energy equal or superior to the energy yield of an explosive-filled shell of greater mass. This would allow more ammunition to be carried and eliminate the hazards of carrying explosives in a tank or naval weapons platform. Also, by firing at greater velocities railguns have greater range, less bullet drop and less wind drift, bypassing the inherent cost and physical limitations of conventional firearms–"the limits of gas expansion prohibit launching an unassisted projectile to velocities greater than about 1.5 km/s and ranges of more than 50 miles [80 km] from a practical conventional gun system."[13]

If it were possible to apply the technology as a rapid-fire automatic weapon, a railgun would have further advantages of increased rate of fire. The feed mechanisms of a conventional firearm must move to accommodate the propellant charge as well as the ammunition round, while a railgun would only need to accommodate the projectile. Furthermore, a railgun would not have to extract a spent cartridge case from the breech, meaning that a fresh round could be cycled almost immediately after the previous round has been shot.

Tests

Full-scale models have been built and fired, including a very successful 90 mm bore, 9 MJ kinetic energy gun developed by the US DARPA. Rail and insulator wear problems still need to be solved before railguns can start to replace conventional weapons. Probably the oldest consistently successful system was built by the UK's Defence Research Agency at Dundrennan Range in Kirkcudbright, Scotland. This system has now been operational for over 10 years at an associated flight range for internal, intermediate, external and terminal ballistics, and achieved several mass and velocity records.

The Yugoslavian MTI (MTI - Military - technology institute) developed, within a project named EDO-0, a rail gun with 7 kJ kinetic energy, in 1985. In 1987 a successor was created, project EDO-1, that used projectile with a mass of 0.7 kg and achieved speeds of 3,000 m/s, and with a mass of 1.1 kg reached speeds of 2,400 m/s. It used a track length of 0.7 m. According to those working on it, with other modifications it was able to achieve a speed of 4,500 m/s. The aim was to achieve projectile speed of 7,000 m/s. At the time, it was considered a military secret.

The United States military is funding railgun experiments. At the University of Texas at Austin Institute for Advanced Technology, military railguns capable of delivering tungsten armor piercing bullets with kinetic energies of nine megajoules have been developed.[14] 9 MJ is enough energy to deliver 2 kg of projectile at 3 km/s–at that velocity a rod of tungsten or another dense metal could easily penetrate a tank, and potentially pass through it.

The United States Naval Surface Warfare Center Dahlgren Division demonstrated an 8 MJ rail gun firing 3.2 kg projectiles in October 2006 as a prototype of a 64 MJ weapon to be deployed aboard Navy warships. The main problem the U.S. Navy has had with implementing a railgun cannon system is that the guns wear out due to the immense heat produced by firing. Such weapons are expected to be powerful enough to do a little more damage than a BGM-109 Tomahawk missile at a fraction of the projectile cost.[15] Since then, BAE Systems has delivered a 32 MJ prototype to the U.S. Navy.[16]

On January 31, 2008 the US Navy tested a railgun that fired a shell at 10.64 MJ with a muzzle velocity of 2,520 m/s.[17] Its expected performance is a muzzle velocity over 5,800 m/s, accurate enough to hit a 5 meter target over 200 nmi (370 km) away while firing at 10 shots per minute. The power was provided by a new 9-megajoule (MJ) prototype capacitor bank using solid-state switches and high-energy-density capacitors delivered in 2007 and an older 32-MJ pulse power system from the US Army’s Green Farm Electric Gun Research and Development Facility developed in the late 1980s that was previously refurbished by General Atomics Electromagnetic Systems (EMS) Division.[18] It is expected to be ready between 2020 to 2025.[19]

The most recent test of a railgun took place on December 10, 2010, by the US Navy at the Naval Surface Warfare Center Dahlgren Division.[20] During the test, the Office of Naval Research set a world record by conducting a 33 MJ shot from the railgun, which was built by BAE Systems.[21][22]

External videos
Official 33MJ video
Additional footage

Trigger for Inertial Confinement Fusion

Railguns may also be miniaturized for inertial confinement nuclear fusion.

See also

References

  1. ^ rolling railgun demonstration (youtube)
  2. ^ Brendan Borrell (February 6, 2008). Technology Review. http://www.technologyreview.com/Infotech/20164/?nlid=857 Electromagnetic Railgun Blasts Off. 
  3. ^ Fauchon-Villeplee, André Louis Octave (1922). "US Patent 1,421,435 "Electric Apparatus for Propelling Projectiles"". http://www.google.com/patents?id=Z_ZBAAAAEBAJ&printsec=abstract&zoom=4&dq=Fauchon-Villeplee. 
  4. ^ a b Hogg, Ian V. (1969). The Guns: 1939/45. Macdonald. 
  5. ^ Harris, William. "How Rail Guns Work", 11 October 2005. HowStuffWorks.com. 25 March 2011.
  6. ^ Wired, Video: Navy’s Mach 8 Railgun Obliterates Record, December 2010
  7. ^ Physical Review E, Paper: Reply to "Electrodynamic force law controversy", vol. 63, Issue 5, id. 058602, published 05/2001
  8. ^ PowerLabs Rail Gun!
  9. ^ Uranga et al. (2005) "Rocket Performance Analysis Using Electrodynamic Launch Assist" Proceedings of the 43rd AIAA Aerospace Sciences Meeting and Exhibit (10–13 January 2005: Reno, Nevada)
  10. ^ Advanced Magnet Lab, Inc. (2008) "Space and Defense" magnetlab.com
  11. ^ Advanced Magnet Lab, Inc. (2008) "Direct Double-Helix" magnetlab.com
  12. ^ a b c d I.R. McNab, "Launch to space with an electromagnetic railgun", IEEE Trans. Magn., vol. 35, pp. 295-304, Jan. 2003.
  13. ^ Adams, LCDR David (2003). Naval Railguns Are Revolutionary. http://edusworld.org/ew/ficheros/2004/railguns.pdf. 
  14. ^ "EM Systems". University of Texas. http://www.iat.utexas.edu/emsys.html. 
  15. ^ Zitz, Michael (2007-01-17). "A missile punch at bullet prices". Fredericksburg.com. http://fredericksburg.com/News/FLS/2007/012007/01172007/251373. Retrieved 2007-01-17. 
  16. ^ Sofge, Erik (2007-11-14). "World's Most Powerful Rail Gun Delivered to Navy". Popular Mechanics. http://www.popularmechanics.com/technology/military_law/4231461.html. Retrieved 2007-11-15. 
  17. ^ "U.S. Navy Demonstrates World's Most Powerful EMRG at 10 MJ". http://www.navy.mil/search/display.asp?story_id=34718. 
  18. ^ "General Atomics Team Powers Navy Rail Gun to New World Record, accessed 14 Oct 2009"
  19. ^ The Navy shows off its insane magnetic railgun of the future
  20. ^ Navy's Record-Setting Test to Showcase Railgun's Military Relevance Friday at Dahlgren
  21. ^ "Electromagnetic railgun sets new world record". 2010-12-15. http://www.janes.com/news/defence/jni/jni101214_1_n.shtml. Retrieved 2010-12-15. 
  22. ^ Video: Navy’s Mach 8 Railgun Obliterates Record
  23. ^ F.D. Witherspoon, “MiniRailgun accelerator for plasma linear driven HEDP and magneto-inertial fusion experiements,” IEEE Int. Conf. Plasma Sci., San Diego, CA, 2009.

External links